The MultiPlus-II 2 x120V is the perfect one-box mobile solution for standard North American 50A 120/240VAC split-phase applications. Whether it is supplied from shore power or a generator, the MultiPlus-II 2x120V can accept and passthrough both lines of a 120/240V supply, with the capability to utilize the full 50A for charging and AC loads. When connecting to a single phase 120V supply, the L1 input of the MultiPlus-II 2x120V will accept incoming power for charging and passthrough, while combining the L1 and L2 outputs for single-phase 120V on each line.
The MultiPlus switches to inverter operation when no AC source is available. The inverter output is also 120V single phase. In inverter mode, the MultiPlus-II 2x120V internally connects both lines L1 and L2 together to provide 120VAC to loads on either output. Therefore, in all connection circumstances, both sides of a distribution panel will be supplied with 120V. However, 240VAC is only available when the MultiPlus is supplied by a split phase 120/240VAC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery.
The MultiPlus-II 2x 120V has all of the expected features of our versatile inverter/charger range, including PowerControl, PowerAssist, Input Current Limit, two AC outputs, as well as parallel and 3ph configuration for larger capacity VE.Bus systems. Suitable for LiFePO4 batteries and a variety of other battery technologies.
Our 50A Inverter/Charger kits are designed for rigs that have a 50A AC service (4 Wire / L1- L2 - N -G), and that already have a 50A AC distribution panel and Shore power connection.
Included:
1x Victron Energy Multiplus 2, 2x120, 3000VA inverter/Charger
1x Master On/Off DC switch
1x Din Rail breaker box
1x 50A Din Rail breaker
1x 400A class-t fuse
1x class-t fuse holder
1x Victron Energy RJ45 cable
20’ 4/0 battery cable
20’ 6/4 120v cable
All necessary cable terminals, and heat shrink
The MultiPlus-II 2 x120V is the perfect one-box mobile solution for standard North American 50A 120/240VAC split-phase applications. Whether it is supplied from shore power or a generator, the MultiPlus-II 2x120V can accept and passthrough both lines of a 120/240V supply, with the capability to utilize the full 50A for charging and AC loads. When connecting to a single phase 120V supply, the L1 input of the MultiPlus-II 2x120V will accept incoming power for charging and passthrough, while combining the L1 and L2 outputs for single-phase 120V on each line.
The MultiPlus switches to inverter operation when no AC source is available. The inverter output is also 120V single phase. In inverter mode, the MultiPlus-II 2x120V internally connects both lines L1 and L2 together to provide 120VAC to loads on either output. Therefore, in all connection circumstances, both sides of a distribution panel will be supplied with 120V. However, 240VAC is only available when the MultiPlus is supplied by a split phase 120/240VAC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery.
The MultiPlus-II 2x 120V has all of the expected features of our versatile inverter/charger range, including PowerControl, PowerAssist, Input Current Limit, two AC outputs, as well as parallel and 3ph configuration for larger capacity VE.Bus systems. Suitable for LiFePO4 batteries and a variety of other battery technologies.
Our 50A Inverter/Charger kits are designed for rigs that have a 50A AC service (4 Wire / L1- L2 - N -G), and that already have a 50A AC distribution panel and Shore power connection.
Included:
1x Victron Energy Multiplus 2, 2x120, 3000VA inverter/Charger
1x Master On/Off DC switch
1x Din Rail breaker box
1x 50A Din Rail breaker
1x 400A class-t fuse
1x class-t fuse holder
1x Victron Energy RJ45 cable
20’ 4/0 battery cable
20’ 6/4 120v cable
All necessary cable terminals, and heat shrink
